Plug Selection

By: Ray Stalnaker  

  When buying PDR plugs, you may be trying to decide between flush plugs and locking plugs,  the truth is, you need them both, depending on the location of the access point, you may or may not be able to use a plug with the depth of the locking plug. You also need to think about the coverage area of the plug, the flush plug covers a much larger area than does the locking plug, so if you are close to an edge, you will want to use the locking plug.  If you have distorted the access hole or flaked some paint on the edge of the hole or something, you will want to touch it up and use the flush plug.